Weather Station

This is a custom-built display for the WeatherFlow Tempest weather station. You MUST
own a WeatherFlow Tempest or Air/Sky, or have the ability to obtain the required WeatherFlow API key from a family member or friend. Home WiFi is also needed for wireless operation.
One of the biggest complaints about the WeatherFlow Tempest is that there is no dedicated display. This device solves this problem by providing a convenient, well-organized summary of all weather data from the Tempest weather station. Weather data is updated every one minute with rapid wind updates as soon as every 3 seconds. The WeatherFlow Air is optional for indoor temperatures.
The WeatherFlow Pi Console displays the following information provided by your Tempest:

Outdoor temperature with dew point, humidity, and feels like temperature

Indoor temperature if you have the WeatherFlow Air

Outdoor and indoor (only with the Air module) daily min and max values along with the time of occurrence

Outdoor temperature 24-hour difference and hourly temperature trend

Wind speed (average, lull, and gust) with direction (degrees and cardinal) provided by 3-second rapid wind updates

Daily maximum wind gust and daily average speed

Barometer with atmospheric pressure, pressure trend, current condition, and daily min and max values

Rainfall totals for today, yesterday, month, and year

When raining, see the precipitation rate and description (light, moderate, heavy, etc)

Lightning time and distance since the last strike

Lightning strike totals for the last 3 hours, today, yesterday, month, and year

Solar radiation and UV index

Sunrise/sunset times and number of hours until dawn and sunset

Moonrise and moonset times, moon phase, and date of next full moon and new moon

Your specific Hourly forecast provided by WeatherFlow

Location-specific Sager Weathercaster forecast

Setting screen to change time/date formats and display units

Screen layout can be changed by editing the configuration file

New: 1, 4, or 6-panel screen layout

New: Internet connection optional (LAN connection still required -- either wired or wireless)

This 7" touchscreen weather display is based on the Raspberry Pi 4, Raspbian Bullseye OS, and the open-source WeatherFlow Pi Console software. The software was recently updated to version 23.11.1.
The display can be placed on a desk, table, countertop, 75 mm VESA mounted, or wall mounted (by removing two keyhole cutouts on the back, but this could interfere with operation of the fan). There are two adjustable angle mounts for permanent mounting included.
The network and USB ports are covered, but access covers can be easily cut out for whatever configuration you need. The weather display does not require any of the ports to be uncovered.  This enclosure does not allow access to the HDMI port, audio jack, and micro SD card. However, a HDMI cable can be run out of the back if desired (case modification is required).
The display measures about 8" x 6.5" x 2". Base is 7.75" x 4.25"
You will receive the display unit pictured and a 5v 4A power supply.
After purchase, I can set up the display for you if you would like. You will need to send me some information about your Tempest. Once you receive the display unit, use the on-screen keyboard to connect to your home Wi-Fi. You can also connect the display to a wired network if you wish.
Please ask any questions you may have.

Returns Accepted for this item if it's within 30 Days